No internet

Posts: 41 ✭✭

I have no I yet er for 10 hours . How I am suppose to work?

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In

Answers

  • Supreme Geek 5/5150🔥 Posts: 5,618 ✭✭

    Hello,

    Do you have any lights working on the modem?

  • Geek 3/5 Posts: 41 ✭✭

    I have no internet for 10 hours


    wnat happened?

  • Supreme Geek 5/5150🔥 Posts: 5,618 ✭✭

    Have you tried to change electrical outlets, verify the breakers?

  • Supreme Geek 5/5150🔥 Posts: 8,238 ✭✭
    edited July 2023

    if it doesn't work contact the green bubble support at the bottom right https://fizz.ca/en/support

  • Supreme Geek 5/5150🔥 Posts: 5,618 ✭✭
    edited July 2023

    Hello,


    You can consider resetting your Wi-Fi modem to its factory settings

    IMPORTANT: This will reset any changes that have been made to your Wi-Fi modem settings to date. You may also need to reconfigure your devices’ Wi-Fi settings (network name, password, etc.).


    Using a small, sharp object, press the modem’s reset button for 10 seconds.


    Once your modem has restarted ( after about 15 minutes ), follow the same instructions you used when you initially installed it.


    Reminder: The default username (Default Wi-Fi network) and password (Default key) for your Wi-Fi network are written on a sticker on the back of your Wi-Fi modem.


    Try manually selecting different Wi-Fi channels on your modem:

    A series of channels are available on each frequency (2.4 and 5 GHz) of your Wi-Fi modem. Interference can have an impact on these channels.

    Manually changing the channels used for your Wi-Fi connection can improve your modem’s signal. ... 

    Choose a channel that’s far from the one your modem currently uses, and test it for a few days to see whether things improve or not. Ex. Go from channel 6 to 11. Or, from channel 6 to 1:


    Option 1: With the Fizz Wi-Fi app.


    1. Once in the app, choose My Wi-Fi.

    2. Select your Wi-Fi network.

    3. Select Advanced settings.

    4. You’ll see Wi-Fi 2.4 and Wi-Fi 5. Select a different channel for each frequency


    Option 2: With a browser.


    1. Connect to your Wi-Fi network. 

    2. Open the browser on any device, and enter the address 192.168.0.1

    3. Log in using these credentials:


    Username: cusadmin

    Password: (Enter your password, the one you chose when you initially configured your network)

     


    4. In the green bar, select Wireless.

    5. Then select:


    Basic settings

    5 GHz and/or 2.4 GHz

    Wireless channel

     

    6. Select a different channel.


    https://fizz.ca/en/faq/my-wi-fi-network-cutting-how-do-i-fix-it#6


    If in doubt you can always consult with the customer support: https://fizz.ca/en/support

  • Supreme Geek 5/5150🔥 Posts: 8,238 ✭✭

    if it doesn't work contact the green bubble support at the bottom right https://fizz.ca/en/support

  • Geek 3/5 Posts: 41 ✭✭

    Ts was done xxxx times today

  • Geek 3/5 Posts: 41 ✭✭

    Option 2: With a browser.


    1. Connect to your Wi-Fi network. 

    2. Open the browser on any device, and enter the address 192.168.0.1



    i cannot do this in the browser because I have no internet


    smd on the app it’s not working either

  • Geek 3/5 Posts: 41 ✭✭
  • Supreme Geek 5/5150🔥 Posts: 8,238 ✭✭

    have you tried wired to see

  • Geek 3/5 Posts: 41 ✭✭

    I do not have a wire

  • Geek 3/5 Posts: 41 ✭✭

    This is not correct


    I cannot use the internet er

  • Geek 3/5 Posts: 41 ✭✭

    It shows connected to the Mac but is not working

  • Geek 3/5 Posts: 41 ✭✭

    I fixed it by myself


    I just used my knowledge .


    vpn is the trick to habe it disconnected

  • Supreme Geek 5/5150🔥 Posts: 14,482 ✭✭

    @Theresa

    You connection works with the VPN?

    If this is the case you have a problem with the DNS

    Do you have another device in order to test your connection?

    Did you modify the DNS?

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In

Activity feed

    Page 1

    Top contributors

    this week

    • BeakBird

      @BeakBirdSupreme Geek 5/5

      1024pts

    • elena code xzi4t

      @elena code xzi4tSupreme Geek 5/5

      332pts

    • stickypawz

      @stickypawzApprentice 1/5

      118pts