No internet

Theresa
Theresa Posts: 34 ✭✭

I have no I yet er for 10 hours . How I am suppose to work?

Answers

  • AK20230110
    AK20230110 Posts: 5,099 ✭✭

    Hello,

    Do you have any lights working on the modem?

  • Theresa
    Theresa Posts: 34 ✭✭

    I have no internet for 10 hours


    wnat happened?

  • AK20230110
    AK20230110 Posts: 5,099 ✭✭

    Have you tried to change electrical outlets, verify the breakers?

  • Sébastien code ZXEL1
    Sébastien code ZXEL1 Posts: 7,754 ✭✭
    edited July 2023

    if it doesn't work contact the green bubble support at the bottom right https://fizz.ca/en/support

  • AK20230110
    AK20230110 Posts: 5,099 ✭✭
    edited July 2023

    Hello,


    You can consider resetting your Wi-Fi modem to its factory settings

    IMPORTANT: This will reset any changes that have been made to your Wi-Fi modem settings to date. You may also need to reconfigure your devices’ Wi-Fi settings (network name, password, etc.).


    Using a small, sharp object, press the modem’s reset button for 10 seconds.


    Once your modem has restarted ( after about 15 minutes ), follow the same instructions you used when you initially installed it.


    Reminder: The default username (Default Wi-Fi network) and password (Default key) for your Wi-Fi network are written on a sticker on the back of your Wi-Fi modem.


    Try manually selecting different Wi-Fi channels on your modem:

    A series of channels are available on each frequency (2.4 and 5 GHz) of your Wi-Fi modem. Interference can have an impact on these channels.

    Manually changing the channels used for your Wi-Fi connection can improve your modem’s signal. ... 

    Choose a channel that’s far from the one your modem currently uses, and test it for a few days to see whether things improve or not. Ex. Go from channel 6 to 11. Or, from channel 6 to 1:


    Option 1: With the Fizz Wi-Fi app.


    1. Once in the app, choose My Wi-Fi.

    2. Select your Wi-Fi network.

    3. Select Advanced settings.

    4. You’ll see Wi-Fi 2.4 and Wi-Fi 5. Select a different channel for each frequency


    Option 2: With a browser.


    1. Connect to your Wi-Fi network. 

    2. Open the browser on any device, and enter the address 192.168.0.1

    3. Log in using these credentials:


    Username: cusadmin

    Password: (Enter your password, the one you chose when you initially configured your network)

     


    4. In the green bar, select Wireless.

    5. Then select:


    Basic settings

    5 GHz and/or 2.4 GHz

    Wireless channel

     

    6. Select a different channel.


    https://fizz.ca/en/faq/my-wi-fi-network-cutting-how-do-i-fix-it#6


    If in doubt you can always consult with the customer support: https://fizz.ca/en/support

  • Sébastien code ZXEL1
    Sébastien code ZXEL1 Posts: 7,754 ✭✭

    if it doesn't work contact the green bubble support at the bottom right https://fizz.ca/en/support

  • Theresa
    Theresa Posts: 34 ✭✭

    Ts was done xxxx times today

  • Theresa
    Theresa Posts: 34 ✭✭

    Option 2: With a browser.


    1. Connect to your Wi-Fi network. 

    2. Open the browser on any device, and enter the address 192.168.0.1



    i cannot do this in the browser because I have no internet


    smd on the app it’s not working either

  • Theresa
    Theresa Posts: 34 ✭✭

    Another screenshot

  • Sébastien code ZXEL1
    Sébastien code ZXEL1 Posts: 7,754 ✭✭

    have you tried wired to see

  • Theresa
    Theresa Posts: 34 ✭✭

    I do not have a wire

  • Theresa
    Theresa Posts: 34 ✭✭

    This is not correct


    I cannot use the internet er

  • Theresa
    Theresa Posts: 34 ✭✭

    It shows connected to the Mac but is not working

  • Theresa
    Theresa Posts: 34 ✭✭

    I fixed it by myself


    I just used my knowledge .


    vpn is the trick to habe it disconnected

  • Jess_i88b6
    Jess_i88b6 Posts: 13,997 ✭✭

    @Theresa

    You connection works with the VPN?

    If this is the case you have a problem with the DNS

    Do you have another device in order to test your connection?

    Did you modify the DNS?