How do I put the fizz modem/router in bridge mode in order to add my own router?
Best Answer
-
Hi
In the last step - Disable the option ''Residential Gateway function''
This will effectively put your modem in bridge mode.
1
Answers
-
Hi @Patrizio
In bridge mode, the two (2) Wi-Fi radios built into your Fizz Wi-Fi modem will be deactivated, thus disabling its Wi-Fi capabilities.
- Open an Internet browser and enter 192.168.0.1 in the address bar.
- Identify yourself using the following login information:
- Username: cusadmin
- Password: **enter your Wi-Fi password**
- Select General
- Select Gateway
- Disable the option ''Residential Gateway function''
- Click Ok
Source: https://fizz.ca/en/faq/how-can-i-use-my-own-wi-fi-router-fizz
If you want to re-enable the Wi-Fi capability of your Fizz Wi-Fi modem, you'll need to reset it to its factory settings by holding down the reset button on the back of the device for ten (10) seconds.
And reconfigure it
2 -
Thank you. I have read those instructions but I don’t see where I put it in bridge mode in the settings. Is bridge mode an option somewhere? Thanks
0 -
Also in the future, if you want to undo bridge mode, you can simply factory reset the Fizz modem.
Using a small, sharp object, press and hold the modem’s reset button for at least 10 seconds.
Once your modem has restarted, follow the same instructions you used when you initially installed it.
1
