How do I put the fizz modem/router in bridge mode in order to add my own router?

Options
Patrizio
Patrizio Posts: 2 ✭✭
edited May 2022 in Internet

How do I put the fizz modem/router in bridge mode in order to add my own router?

Best Answer

Answers

  • Jess_i88b6
    Jess_i88b6 Posts: 13,037 ✭✭
    edited April 2022
    Options

    Hi @Patrizio

    In bridge mode, the two (2) Wi-Fi radios built into your Fizz Wi-Fi modem will be deactivated, thus disabling its Wi-Fi capabilities.

    • Open an Internet browser and enter 192.168.0.1 in the address bar.
    • Identify yourself using the following login information:
      • Username: cusadmin
      • Password: **enter your Wi-Fi password**
    • Select General
    • Select Gateway
    • Disable the option ''Residential Gateway function''
    • Click Ok
    Source: https://fizz.ca/en/faq/how-can-i-use-my-own-wi-fi-router-fizz

    If you want to re-enable the Wi-Fi capability of your Fizz Wi-Fi modem, you'll need to reset it to its factory settings by holding down the reset button on the back of the device for ten (10) seconds.

    And reconfigure it


  • Patrizio
    Patrizio Posts: 2 ✭✭
    Options

    Thank you. I have read those instructions but I don’t see where I put it in bridge mode in the settings. Is bridge mode an option somewhere? Thanks

  • PF_Ref_D2U9A
    PF_Ref_D2U9A Posts: 5,757 ✭✭
    Options

    Also in the future, if you want to undo bridge mode, you can simply factory reset the Fizz modem.

    Using a small, sharp object, press and hold the modem’s reset button for at least 10 seconds.

    Once your modem has restarted, follow the same instructions you used when you initially installed it.

This discussion has been closed.

Categories