Is LG V20 compatible with Fizz?

James D. #2445
James D. #2445 Posts: 5 ✭✭
I am trying to connect two LG V20 phones to Fizz and am having issues. We are not able to get MMS messages to work and for some reason I can't turn on a WIFI hotspot. When I (or the Fizz staff) try to "Resend the network parameters (APN) to your phone" an error message shows up, so I have set the APN settings manually. The response received by email from Fizz staff regarding our MMS and APN issues, is our phone is not compatible with the Fizz system. Is anyone else who is using an LG V20 able to get all features to work?
Thanks

Answers

  • Kevin M. #985
    Kevin M. #985 Posts: 98 ✭✭
    If you want to look up if any device is compatible here's the link to that page.
    https://fizz.ca/en/faq/compatible-devices
  • Sebastien
    Sebastien Posts: 2,127 ✭✭

    If you go to setting, about this phone, you'll see the exact model. Is it F800K, L, etc?

     

    Look at https://www.frequencycheck.com for your devince, then click "check country/carrier compatibility" and look for Videotron.

     

    You need to have theses frequencies on your phone : -Calls: Your device must support HSPA 850 MHz or 1900 MHz frequencies -Mobile data: Your device must have dual-frequency support for 1700/2100 MHz (also called AWS or band IV)

  • DinoS
    DinoS Posts: 626 ✭✭
    If it's from freedom mobile and unlocked, yes
  • James D. #2445
    James D. #2445 Posts: 5 ✭✭
    Thanks.
    The phones (model LG-H915) worked perfectly before on the Telus network. They were both unlocked phones. Using the weblink suggested above it reports the phones are 100% compatible with Videotron network. https://www.frequencycheck.com/carrier-compatibility/WGq1HrK/lg-h915-v20-lte-a/videotron-canada
    It has bands: B4 (1700/2100 AWS 1) and B17 (700 bc) for LTE and B4 (1700/2100 AWS 1) for UMTS. These are LG flagship phones although a couple of years old. Any other thoughts?
  • Jonathan C. 2531
    Jonathan C. 2531 Posts: 175 ✭✭

    Your phones have all the necessary frequency band support for both data and voice calls. The resending network parameters doesn't work for me either, but all the phones I've used are perfectly compatible with Fizz. If calls but not data services are working for you I see only 2 options: 1) your APN settings are wrong and/or you need to fix it and/or reboot, or 2) there is something wrong on Fizz's end where data hasn't been enabled for your plan.

     

    Is there any chance you originally signed up with just voice services and then changed your plan to include data after deciding to keep Fizz? If so the change isn't active until your next billing cycle.

This discussion has been closed.