Comments
-
Can anyone guide me to set the Hitron as a BRIDGE instead of Router mode? I tried disabling Residential Gateway Function and just wasted 45 minutes factory resetting it to get internet again... back to square one.
-
I have 2.4G and 5G on the Fizz Router (Hitron 4680). 5G for the PC Router (Portalwifi). 2.4G on the living room router (TP-Link Archer C50 AC1200) I took the time to check all channels with Wifi Analyzer for Android. None overlap. All different SSID. Used to have 8 different SSID in the house and did not have a problem for…
-
@Fizzy Support suggested me to use the Bridge Mode on their Fizz Router. The setup is not really complicated, the Fizz Router is in the mechanical room in the house with 2 ethernet cables going to both end. At each end there is another router in bridge mode, one connecting 2 computers, the other end connecting consoles and…
-
I tried contacting Fizz with Facebook Messenger. Is there a number I can call? A help ticket system? It is quite unusual to have a defective device after a day...
-
The wi-fi is still losing internet every few hours while the wired connection is still online.
-
Note: The channels and other settings were changed AFTER it lost connection. Doing a Factory Reset just set it back to what it was when it stopped working after 24 hours but it started to work again. Nothing to understand there, it seems purely random.
-
Factory Reset is done and wi-fi is back online. Let's see if it still works in 24 hours...
-
Tested wi-fi with my Google Pixel 3 and Samsung Galaxy S7. 2 desktop PC are working fine with a wire. Power-cycled the router by disconnecting the cable. The unit is on the ceiling in the basement, no heat source or anything special around it. Wired speedtest are at 130mbps. Yesterday I was speedtesting the wi-fi at…
